Reading volume:14 发表时间:2019/9/1 8:41:36
Today, the editor will share the parameters and effects of the induction heating process of the sprocket. If you want to know this topic, please come and learn about it with the editor.
The super audio frequency has a DC current of 80~100A, a DC voltage of 200~220V, an output power of 20kW, a heating time of 4s, and a cycle of 20~22 times.After cooling, perform anatomical inspection of the product. The thread, R and B, C heat affected zone have a good hardness gradient distribution, which meets the technical requirements of the product.However, when the RYTD-45 isothermal salt bath furnace heating annealing process and the ultrasonic simultaneous heating annealing softening process are used for treatment, the process stability is relatively poor, and it is difficult to guarantee the product technical requirements.
Related knowledge introduction:
The optional sprocket should match the machine model
Sprockets are widely used, and there are many types of sprocket, but the sprocket used by different machines is also different.
1. Selection
What kind of sprocket to choose needs to be judged on the mechanical type. Only when the model matches the model, it is impossible to ensure its function.
2. Location
It is also necessary to carefully consider where the sprocket is installed, especially whether the connection part is normal or not, which is the part to be checked.Once an abnormal finish is found during the inspection, it must be dealt with in time, otherwise it is not allowed to continue.
3. Tightness
After the installation is completed, the necessary test of the tightness of the sprocket is required to ensure that it is maintained within a reasonable range.
Pay attention to this website for more relevant knowledge. If you need help, you can call for consultation at any time.