Sprocket tooth surface wear is common in open transmission, poor lubrication conditions, and dust in the working environment.

    Excessive wear of industrial sprockets is directly related to the performance of the lubricant used.When used, the lubricating oil is required to have the working viscosity under the recommended working conditions, including additives, good anti-wear performance and low sliding friction coefficient, which can reduce the wear speed of industrial sprocket and prolong the service life of the sprocket.There are many reasons for excessive wear of industrial sprocket, mainly as follows:

    1. The sprocket design parameters are unreasonable.

    2. Poor lubrication or failure.

    3. There is severe vibration or shock load.

    4. The working environment is dusty.

Blinds manufacturer http://www.rqbohao.com

We can prevent excessive wear of the sprocket by improving the design, replacing the sprocket, improving lubrication, and improving the manufacturing and installation accuracy of the sprocket.

Click below to read more related articles

Precautions when designing gear hubs

Analysis of the difference between sprocket drive and belt drive in agricultural machinery?

Detailed 5 common methods for repairing worn sprockets