Product Presentation:
Wheelchair lifts are lifts particularly designed and produced for men and women with disabilities. In buy to facilitate the travel and sightseeing of the disabled, in communities, hospitals, colleges, lodges, lodges, community places and other spots. It can be utilized indoors or outdoors, with gorgeous framework, security and stability, and straightforward to use. It can be CZPT according to your needs.
Measurement Data:
System peak | 1-10m |
Platform size | 1200x900mm or CZPT |
Load | 250-300kg |
Attributes:
one. It can be employed indoors or outside.
2. It is easy to install, no need to have a pit.
3. It runs stably CZPT sounds.
4. It can be CZPT in accordance to your requirements.
5. It has two management approach: button and distant control.
six. It has emergency descent system if electrical power-off scenario occurs.
How To Use:
A. Just before use:
1. The elevator carry has been inspected and debugged prior to leaving the factory, and all technical indicators have attained the style demands. The user only needs to go through this handbook very carefully and strictly comply with the steps when making use of it.
two. Non-experts are not allowed to adjust the hydraulic system, electrical management technique and elevator structural parts.
three. When the elevator lift is set up and utilised for the very first time, very carefully check no matter whether there is any abnormality in the hydraulic pressure, electrical appliances, and structural elements, and debug it only when there is no abnormality. Complete the load test after 3 to 5 instances of no-load. This action is also applicable right after the elevator overhaul.
four. The elevator elevate has a guiding framework, carefully check the verticality and parallelism of the guiding structure, and debug it only after confirming that the guiding framework is good. The elevator shall not be loaded for the duration of first commissioning.
five. For elevator lifts that are out of support for a lengthy time, sections two to 4 of this chapter need to be carried out before use.
B. In the course of use:
1. The procedure of the elevator is designed as a entirely computerized operation method. Just click the corresponding button on the control box to realize the corresponding motion, and the cabin will end immediately when it reaches the corresponding ground. The realization of these capabilities is understood by electrical appliances this sort of as AC contactors and limit switches.
2. No overloading.
C. Right after use (upkeep):
one. Whether there is abnormal sound in numerous parts. If so, it ought to be dealt with in time.
two. Clean the hydraulic pump following one particular yr of procedure of the elevator elevate, and change the seriously worn rotating and transmission elements these kinds of as shaft pins.
3. After the elevator raise has been working for one particular year, check out no matter whether the manage circuit and electrical appliances are corroded and rusted, and whether or not the joints of the circuit are unfastened, collapsed, rusted, etc. Uncover problems and offer with them in time.
four. Replace the hydraulic oil at the very least once every single 6 months. If the frequency of use is high, change the hydraulic oil after each and every three months.
FAQ:
one. Is your solution CZPT?
Yes, due to the fact the conditions are diverse, all products are CZPT based on detail necessity! If you give us far more information about our merchandise, we will give you a quite fast quotation!
two. What is the info should I provide when inquiry?
The more thorough details you give, the a lot more accurate answer we can get ready for you! This sort of as the capability, carry top, electricity supply or other specials you give us will be far more appreciated.
three. What is the minimal buy quantity?
It is one set, and of course, the much more the far better.
four. Are you a manufacturer or a dealer?
We are a popular hydraulic lift manufacturer in China. You are welcome to have a go to to our factory.