Cellular loading platform
The loading and unloading system is a very well-liked transportation way in the present day logistics. It is a bridge connecting the organization logistics chain, and also a loading and unloading procedure system for enterprises to speedily and properly transportation the items and goods. The top of the system can not be modified, but the peak of the carriages is diverse. There is always a specific height big difference or hole amongst the transportation car and the loading and unloading platform, which leads to the forklift to be not able to enter and exit the transport vehicle to immediately load and unload the products.
The little cell loading and unloading system can provide a reputable connection with the truck, so that the forklift can safely and securely and swiftly enter and exit the transportation automobile for loading and unloading functioning. The solution has the attributes of practical unloading, sturdy balance and minimal servicing price, which is suitable for a variety of cars on loading and unloading websites andplaces with fairly heavy visitors.
| Product | ZXPT16‐2 |
| Greatest lifting height | 1.6m |
| Maximum ability | 2000kg |
| System measurement | 2000*1675*800 |
| Link plate measurement | 1530*650 |
| Total size(L*W*H) | 2155*2380*2570 |
| Motor | 380V/3kw(220V/2.2kw) 380V/3kw(optional 220V/two.2kw) |
| Lifting pace | five-6m/min |
| Tyre | 7 inch and six inch universal wheel |
| Oil cylinder | 63/40*two |
| Handle | wi-fi distant handle |
| Chassis | 60*one hundred twenty*5 rectangle pipe 50*a hundred*3.seventy five rectangle pipe |
| Xihu (West Lake) Dis. | 14B# U-bar |
| Excess weight | 850kg |
Methods:
1. Shift the cell loading and unloading platform to the facet of the car or system that wants to load and unload products, and make the facet with the help roller near to the car or system.
two. Adjust the help roller of the loading and unloading system and enable its top a bit reduced than the peak of the vehicle or system.
3. Rotate the support outrigger to make it help the gear, and avoid the equipment from transferring by by itself. If the support outrigger is not supported well, the equipment is strictly prohibited.
4. Use the aviation plug outfitted with the gear to hook up the energy line. For your protection, make sure you guarantee that the products is reliably grounded.
(If 380V, we recommend that you use national normal copper wire above 1.five sq. meters, if 220V, you’d better use countrywide standard copper wire above 1.5 square meters.)
5. Up and down buttons on the distribution box can management the ascending and descending motions of the desk, or use the outfitted distant control to do the very same procedure.
6.When the gear powers off or malfunction occurs, the products can be reduced to the least expensive level via the manual descent button on the aspect of the pump station to make sure safety.
Notice:
The 380V solution might reverse the motor due to period sequence, consequence the equipment can’t increase up.Then we want to change the stage sequence.
Notes:
one.When employing the device, link the energy cable correctly to stop electrical parts from burning out.
two. The assist bar have to be reduced when the gear is working.
3. The load capacity ought to not exceed the rated load, and the load ought to be evenly dispersed on the platform area. Do keep in mind CZPT partial load.
four. The operator ought to know the efficiency and the operation procedure of the equipment.
5. The temperature of functioning surroundings is from- 10 ° to 50 °. 32# hydraulic oil is used in winter season and 46# hydraulic oil is employed in summer time. The oil should be replaced if the products is used for more than one thousand hrs or twelve months.
six. Before making use of, you should keep in mind to verify regardless of whether all the fastened components are firm or not, whether or not the pipe connection is trustworthy, whether or not the pipe is ruined. To make certain that the electrical elements are working normally, the lubrication oil is adequate in the manual way.
7. The system should be decreased to the lowest placement once completed utilizing.
8. The tools has no water-resistant operate. Do not get moist in the rain when storing outside.
