All EPT shaft collars, including quick-clamping collars, are single point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar experience to bore relationship resulting in correct element positioning on the shaft and actually pressure on interfaced ingredients.
Quick-clamping shaft Clamping Shaft Collars collars from EPT are made of high quality light weight aluminum with type-II sulfuric anodized finishes, with a dark-colored finish on the collar and a gold finish on the clamping lever for added visibility. Lightweight aluminum collars are corrosion resilient, lighter than different metals, possess low inertia and also have non-magnetic properties. All EPT items will be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars will be 0.375” to 1 1.5” in the ” series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is constructed of black oxide steel. This is a two-part clamping shaft collar for applications requiring a more powerful holding power and higher axial load capacity than setscrew or one-part clamping collars. The two-piece style separates into two halves, allowing installation or repositioning everywhere on the shaft without disturbing existing factors. It accommodates a greater selection of shaft diameters than setscrew collars and works well on both hard and delicate shafts. It is made of steel for weldability and rust level of resistance with a black oxide complete for a attractive appearance and resistance to white-colored corrosion, chipping and flaking, and stick-slip of the screw during torqueing, increasing the collar’s grip on the shaft. Dark oxide also provides gentle corrosion resistance and better lubricity. This collar comes with forged socket-brain cap screws for securing the collar onto the shaft. The operating temperatures because of this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suitable for use in various applications, which includes in the car industry to situate pieces in automobile power steering assemblies, the manufacturing industry to locate parts on a conveyor belt program, and the hobby craft sector to hold wheels on axles in remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft without the need to remove other ancillary pieces. Clamps firmly in place when tightened to the shaft. Perfect for positioning ingredients such as for example bearings or sprockets onto shafts.
The positioning is easily adjusted when fitted onto a shaft. Clamps firmly set up when tightened to the shaft. Perfect for positioning parts such as for example bearings or sprockets onto shafts.
The twice split shaft collar made of steel browned (clamp collar) is simple to install. The shaft collars usually do not damage the shaft. Also, they are insensitive to external forces and vibrations and distribute the having forces evenly over the complete shaft circumference.
Clamp-style and placed screw shaft collars from Grainger can be indispensable to power transmission. They are able to carry bearings and sprockets on shafts, situate components in motor and gearbox assemblies and provide as mechanical stops. A two-part clamping shaft collar can certainly wrap around a difficult or smooth shaft without marring. Established screw collars work with a cup point socket collection screw to lock onto a soft or predrilled shaft.
The collar clamping mechanism works quickly and effectively with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface of the collar. The design of the cam on the lever and the mating machined surface area on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In conditions where higher holding vitality is certainly or clamp axial load is required, the quick-clamping collar is not the recommended choice. EPT offers a total line of industry-leading one-piece and two-piece shaft collars created for these applications.