Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric electric motor, capacitor and quickness control switch is still installed nevertheless the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for alter type.)
T (See “App Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is electric fan motor china definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). If you order several electric motor at a time, we can do our better to supply your order with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a completely enclosed fan electric electric motor and made to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electric engine will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric motor is manufactured in China.