The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit provides torque capacities up to 20,000 Nm (14,750 ft pounds).
The cat4CAD software allows simple interactive product collection of the entire gearbox and gear-motor system. Cat4CAD facilitates you in choosing and configuring these products, gives you the chance to print out extensive technical data linens, and generates complete 2D drawings and 3D versions for direct download.
11 sizes
Input power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty course F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and higher torques in smaller sized sizes.
Multiple Input Options: Essential gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, mounting pilots and flanges provide a wide range of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal mounting on five sides or via a torque arm.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements plus modular design to accept brakes, encoders or forced cooling.
High efficiency engine design available
Innovative self-locking, self-aligning taper shaft engine connection
Gearbox supplied factory filled with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals upon heat treated, plunge ground shafts
Shaft mounting choices include tapered bushings designs
This is a comprehensive helical bevel gear reducer offering of energy-efficient, right angle helical bevel enclosed gearing. It is offered as gearmotors and a number of reducers with torque capacities up to 119,000 inch pounds. Housing styles include footed, encounter and flanged configurations. Gearmotors are available in three stage high efficiency styles through 50 HP and single phase to 5 HP. We provide a variety of input and result shaft choices. Additionally, you will see fixed and variable quickness motors and range of ratios obtainable in this product offering.
Features
Accommodates input power from ¼ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Reduction ratios up to 7,500:1
Helical – bevel – helical gear train offers cost effective high and low speed solutions
Up to 94% efficient
Four input possibilities for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Crucial dimensions interchangeable with main competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
DURABLE Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the growing and varying demands of customers, you can expect an array of Helical Bevel Equipment Reducers. The technological content material of our products allows for an extraordinary overall performance/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we provide are successfully found in a multitude of commercial and civil applications. They are B-Series units which offer excellent affordability and output torque/weight ratio, especially due to the fact they need very limited servicing. Besides these, our products are available in cast iron (sizes 063 to 163) or aluminium (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for motor coupling, IB with input shaft, CB with small motor, PB-fitted for engine coupling with flexible joint
Casing with feet FC, flange SC and common UC
Switch on to 90 kW
Gears hardened and tempered with shaved or ground profile
Gearing with 3 decrease stages
Gleason spiral bevel gear pairs with run-in profile, mounted as second reduction stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-power casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to ensure top level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, result flange, result shaft, shrink disk, backstop device, protection cover package, viton oil seals, reinforced output, assemble/disassemble kit
Series EP right angle helical bevel gear motors offer ratios from 8:1 to 160:1 in three levels or up to 10000:1 in five levels. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor was created with integral cast feet for base or end mounting and will be offered with single or double extended output shafts.
Models are also available because shaft mounted or with output flanges and are designed for installation horizontally or vertically. The systems can also be provided with a bolt on torque reaction bracket and all variants are available possibly motorised or with an input shaft assembly.
Adding to the new selection of Ever-Power helical gear motors this product takes advantage of our a long time of accumulated design knowledge together with the utilization of top quality materials and elements. The end result is a number of velocity reducing geared motors providing high load carrying capacities, increased efficiency, calm running and reliability.
Features of Helical Bevel Gear Motor
Standard motor connection
Ability to fit double oil seals, on insight and output shaft as required.
All products are dimensionally interchangeable with additional major manufacturers.
Units are produced and assembled from a family group of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be installed with a backstop module and reducer Units can be fitted with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are found in industries such as chemical substances, pharma, packaging, food processing, plastic-type material and automation etc.
Key Features:
Sizes: A40-A50-A70
Available versions: EP – fitted for motor coupling, IEP – with input shaft, CEP – with small motor
Cases with foot, flange or universal
Power up to 4,8 Kw
Gears with shaved or floor profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
Accessories: torque arm, result flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission device and composed of Y series engine, helical gear,Arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1: Helical-bevel gear two-stage reducer
2: Compact structure, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Small design, small volume, good appearance ,and strong capacity to be overloaded.
6: Precise division and wide selection for transmission ratio.
7: The effectiveness is up to as high since 96% with low energy consumption, strong adaptability and is with the capacity of functioning continually in corrosive or damp environment.
8: All- purpose use, convenient and low-cost maintenance.
9: New seal gadget, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.