Kevlar Chopped Fiber

10mm kevlar chopped fiber was chopped in 10mm by a specific reducing equipment. This fiber has higher power and modulus, powerful hydrogen bonding power, power up to 28 g/d or much more, energy is 5-6 occasions of metal wire.distinct modulus two-3 moments of it,toughness two instances of it while fat is just one/five of the wire.Constant using temperature selection is really broad, prolonged operating in the assortment of -196 ºC to 204 ºC,no decomposition and melting at high temperature of 560 ºC,toughness can maintain seventy five% by means of 100 hrs at two hundred ºC.also has great chemical solvent resistance, resisting acid and alkali, anti-growing older, very good adhesion to rubber. Usually it is utilized as a reinforcing content in the fields of thermoplastics, thermosetting plastics, substantial-temperature composite structures, brake pads, clutch linings, friction materials, use-resistant filler, cable sheathing, gaskets, slot insulation, phase insulation barrier, interturn insulation and so on.


Model: XGPF1210
Colour: yellowish
Fiber type: Para-aramid
Density(g/cc) one.forty seven
CZPT density of mono filament(D)  1.5
Filament diameter(μm) 12
Fiber length(mm) ten
Tensile strength( cN/dtex) 19.four-21
Elongation at break(%) 2.5-three.eighty four
Tensile modulus(GPa) eighty~a hundred and twenty
Shrinkage(%) <0.2(190ºC×15m)
Moisture (%): <0.2

Software FIELDS:

1.CZPT CZPTs,thermosetting resin,friction resources, automotive brakes,composite components and Kevlar bolstered paper. 

2.reinforcing supplies,building,rubber,reinforced cable,cable and other substantial-intensity rope.

3.composite substance with resin or rubber,can significantly lessen the excess weight,increase loading fat,suitable for the creation of aerospace tools,high-pace trains and yachts shell.

4.Friction and sealing components,friction resources reinforced fiber, considerably improved wear resistance,ideal for large temperature problems.



The 10mm kevlar chopped fiber should be hold dry in their first bags and saved in a ideal place,preferably at place temperature with 35-65% relative humidity.Avoid the solar, rain and hearth




1.Cargo by sea:for sea transportation,usually 20 pallets(each 180kg.two layers)be loaded into 20 ft container.whole net fat is 2400kg.

2.transportation by truck:for truck transportation,normally loading in buck with 7layers,about 3120kg

3.transportation by rail:for rail transportation,normally loading in buck,about 6720kg.


Item Element Photographs:

Kevlar Chopped Fiber