The Taper Attach Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two units of wrench flats produce it equally simple to attach or take away from the suppressor or your firearm’s muzzle threads. No proprietary tools necessary. Available in 1/2×28 and 5/8×24 with 18x1mm support just around the corner. While it is practical to have direct thread suppressor capacity that may move from sponsor to host with no need for more muzzle gadgets, it is crucial to remember that each host firearm must be examined for baffle alignment via visual inspection before firing.

The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 can be utilised up to .338 caliber.

The use of immediate thread adaptors enhances on immediate thread mounted suppressors, by allowing the finish user to have modular thread pitches. One Taper Install Suppressor to Rule ALL OF THEM.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for every contingency
Taper Attach Repeatability and Stability
Multi-Thread versatility for your Taper Attach Suppressor
taper adapters allow the utilization of holders or equipment with a different machine-side taper then the machine spindle taper, such as by using a BT40 tapping chuck on a 50-taper spindle.

These adapters remove lead period losses in the event of a machine breakdown. Adapters may also assist in testing Taper Adapter custom tools on another machine than the planned production machine.

Taper adapters avoid the need for a way to obtain new holders or tools for a particular machine. They arrive prepared to apply with built-in locked clamping mechanisms having a clamping screw on a ball bearing for steep taper clamping or HSK locking product for taper clamping.
The steep taper is the standardised form of a tool taper for clamping tools in the primary spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (on the other hand with the Morse taper), thereby making tool improvements easier without clamping. This is especially significant for automatic tool changes
Tiny clamping travel equals short clamping time
High torsional rigidity because of the short distance between your cutting edge and spindle bearing (short overall length)
For adapting morse taper tools to milling equipment that take R8 tools
Alloy metal hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Equipment More taper minimizing sleeve can be used to convert your headstock by #2 MT to #1 MT. This is useful for those who have a travel middle or pen mandrel which is usually 1MT as well as your headstock is 2MT