Worm drive gearbox with motor
A robust worm-travel gearbox powered by an MM28 engine. Ideal applications where a simple to fit, high torque productivity is required. Ideal for student based assignments including robots and buggies.
The unit has been designed so that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The motor is snap fitted into its cradle to activate the gear and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and additional applications where large torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to a few amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at suprisingly low voltages. We recommend that you use stall-detection sensors, or simply see your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not especially intended to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right angle worm geared motors established new requirements for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration now and a truly future proof alternative. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, face, and flange alternatives. The motor terminal box could be mounted in alternate positions rotated in 90º steps around the motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors comply with North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total alternative for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be utilized outside or in wet and dusty environments without the utilization of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Plug connectors.
With included inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the solution for applications requiring a part turn, optional dual result, or an inability for the engine to be back driven. The DC right angle gear motors are made for continuous and intermittent duty procedure. Our right angle gear reducers were created with several mounting plate choices, making them well suited for a number of DC motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to generate high torque in a small package size. Worm Equipment Motors are great for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power used. Also, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items includes a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
Security Door Locks / Industrial Conveying Devices / Security Gates / Teeth Chairs / Ambulance Cots & Stretchers Many of our DC Motors could be complimented with among our Worm Gearheads. EP Products will continue to work with you to design and produce a Worm Gear Engine which will optimize the overall performance of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Slice / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm motor uses a metal gear box for durability and a high torque output. Because of the special mechanical framework of the worm drive the engine output shaft can be self locking and can not be rotated.
This part runs on the two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their strength in applications where high gear ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great known reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions enable simple and effective cleaning of the travel system.
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its unique requirements. The EP series worm equipment motors can be quickly and efficiently adapted to meet your needs.
Worm gear models impress with their large power density and compact style. If required, we can also source them with the highly effective nsd tupH surface area treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on parts to customize the product including torque arms, shaft addresses and output flanges. These could be easily field installed, but we will also be pleased to assemble the individual components for you.
Find out more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear models feature a smooth, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides numerous fixing possibilities and enable a simple assembling for the client.
Various other drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and result flanges). The housings are created in light weight construction out of aluminium die cast. Motor attachment is realised in general through IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load acceleration, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm vast, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most ideal for applications where an easy to fit, high torque end result is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most suitable for applications where a simple to fit, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible Excessive torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared motor with self-lock, that is, regarding motor without electric, the outcome axis is usually fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole electric motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where great holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm gear is definitely a better option when compared to spur gear motor. Why is worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs output shaft) is not reversible when using large reduction ratios, because of the greater friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm can be used. This can often be a advantage when it’s desired to remove any possibility of the output driving the input.”
In other terms, it is challenging to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor