Condenser Unit AC with Micro-Channel Copper Tube

                      Micro channel parallel stream radiator specialist producer

The condenser-a component of the air conditioning circuit-is integrated into the motor cooling module, the place it is utilised to awesome down and condense the compressed, gaseous refrigerant from the compressor. We produce brazed, flat tube condensers that deliver higher performance in spite of their compact and lightweight design. They make certain fast cooling of the passenger compartment many thanks to optimum matching of heat transfer and strain drop on each the coolant and the air aspect.

The condenser is a heat exchanger in a cellular A/C technique. These days, condensers are normally produced of aluminum, but in the earlier, some have been produced of copper/brass. Condensers seem extremely a lot like radiators, just a tiny thinner, and because they also depend on air flowing by way of them, are normally found in entrance of the radiator.
Like radiators and evaporators, condensers are also built as a collection of tubes with fins all around them. its  job is to launch warmth. A lot more especially, to release the warmth the refrigerant absorbed whilst it was flowing by way of the evaporator, quite a lot the very same way the radiator releases the heat from engine coolant that the coolant absorbed even though it was flowing via the motor. The refrigerant enters the condenser as a large-strain vapor, but as it flows via the condenser and cools, it turns back into a cooler high-stress liquid.

Merchandise attributes
1 adopt low height fins and multiple flat pipes to increase the heat dissipation area and improve the heat dissipation performance.
2 fin special treatment to enhance lodging resistance and maintain the tidiness of the products’ appearance 
3 powder coating on the products can enhance corrosion resistance and improve product life cycle.
4 none- argon arc welding solder products look different.
5 every product’s pressure is maintained by using nitrogen so the product is free from leakage at 100% before it leaves the factory

Company Advantage
one. Generic products are supposed to be manufactured strictly according to the installation standard of the original factory, in this way to ensure the accurate installation for the users.
two. This special design for the pin not only enhances its lodging resistance,ensure the visual appearance tidy but also reduces the air blockage chance, it also allows more heat dissipation area to improve heat transfer performance. In that way, the air conditioning system can achieve its expected function more efficiently.
3. Part of the products uses galvanised microchannel flat tube as material or adopt the powder coating treatment, in order to improve products’ corrosion resistance and prolong the service life.
four. By machining core into different thickness and wave distance and changing the amount of holes in flat tube,we can improve the heat dissipation efficiency of condenser of the product, lower down the system compression power, save fuel and improve economic efficiency.
five.CZPTy product is double checked and a pressure-holding device is installed to ensure that every product is 100% leak-free before it leaves the factory.
6. The company with a complete production chain, is focused on the developing new products, and keeping tracking of products to ensure the timeliness of all product supply, and also enhance the flexibility of enterprise operation.
seven.Only when we have an independent team with high efficiency can we satisfy CZPT demands.  

Long expression organization is based mostly on our trusted providers, rapidly react and our professional expertise to Vehicle AC. We’ll turn out to be your companion, not just your provider.
1.CAD Drawing, and mould design base on your sample
2.Mould examination and sample verification just before mass production.
3.CZPTers of different shipping lines.
4.competitive freight delivers and a single-end support on clearing, transport problems.

Q1. Are you a manufacturing facility or trading organization? A: we are a self -possess manufacturing facility, we offer one-quit support for our buyers, from spare components to condenser, from specialized product sales to shipping and to soon after-income, so as to help save the price for customer, control the good quality and guide time, give the very best companies
Q2: The place is your manufacturing unit situated? How can I visit there? A: Our factory is situated in  HangCZPT, Shan dong, China.
The closest airport is ZheJiang Yaoqiang airport or HangCZPT Liuting airport.
Q3. What’s the creation time for new molds and mass generation? A: 7-ten days to build the new moulds, mass creation takes close to twenty-25days for 1 20gp,twenty five-30days for a single 40hq, can method urgently if require.
This autumn: What is the payment conditions? A: Telegraphic Transfer (T/T) and Letter of Credit (L/C).
Q5: Can you ship me samples? A: Sure, Samples are for free of charge, and freight is on your side.


Condenser Unit AC with Micro-Channel Copper Tube