high efficiency bucket elevator for cement plant
Introduction
THG/TDG Higher Effective Bucket CZPT is the upgraded from TH/TD bucket elevator. Bucket elevator is composed of sprocket/drum, chain/belt, driven unit, head part, middle casing and tail segment and many others. Higher Effective Bucket CZPT can be widely employed in numerous industries this kind of as mining, mineral, chemical, agriculture, electricity, foodstuff and other industries etc.
Positive aspects and Features
1. Effective bucket elevator device with massive ability, substantial lifting top.
two. With varieties of buckets, to fulfill the requirement of various varieties of material.
three. THG bucket elevator adopts alloy steel ring chain, soon after area treating and heat managing, average hardness, higher energy, better abrasive resistance.
four. TDG bucket elevator adopts metal cord rubber belt, great toughness, high strength.
five. CZPT, tail areas and center housing situations with excellent sealing, no material and dust leaked, with no air pollution.
six. With holdback to stop materials backflow when shut down in an crisis.
seven. Bottom adopts counter fat take-up system, make itself computerized just take-up, to stay away from belt monitor slip or chain consider off.
8. Improve velocity control sensor and mechanical degree detector, it is matched by CZPT.
9. Motor model can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG and many others
10.CZPT brand can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF etc.
CZPT Parameter:
TDG Belt Bucket CZPT(with Sh bucket)CZPT Parameters Table | |||||||||||
Major CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
160 | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | a thousand | 1250 | 1600 | |
Potential Q(m³/h) | 32 | forty five | seventy two | one hundred and one | 158 | 220 | 348 | 492 | 788 | 1.22 | 1541 |
Bucket Volume /L | 2.six | four | 7 | ten | 16 | twenty five | forty | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 260 | three hundred | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Fat of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.two | forty two.two | 62.3 | 78.53 | 106 | 145 | one hundred fifty five.five | 223 |
Managing Velocity v/(m/s) | one.2 | one.2 | 1.34 | one.34 | one.5 | one.5 | one.68 | one.65 | one.86 | 1.86 | 1.836 |
Lifting top max/m | eighty | eighty | 80 | eighty | 80 | eighty | 80 | eighty | 80 | 80 | eighty |
Be aware:the ability in the table is calculated according to seventy five% of the fill issue. |
TDG Belt Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Primary CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
a hundred and sixty | two hundred | 250 | 315 | 400 | 500 | 630 | 800 | one thousand | 1250 | 1600 | |
Potential Q(m³/h) | 24 | 31 | fifty one | 74 | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
Bucket Volume /L | one.9 | 2.9 | 4.six | seven.4 | 12 | 19 | 29 | 47 | seventy four | 117 | 184 |
Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Weight of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.two | forty two.2 | 62.three | 78.fifty three | 106 | a hundred forty five | 155.five | 223 |
Managing Speed v/(m/s) | 1.two | one.2 | 1.34 | one.34 | 1.five | one.5 | one.sixty eight | one.65 | 1.86 | 1.86 | 1.836 |
Lifting top max/m | eighty | eighty | 80 | eighty | 80 | eighty | 80 | eighty | 80 | 80 | 80 |
Note:the capability in the desk is calculated according to 75% of the fill aspect. |
THG Bucket CZPT(with Sh bucket)CZPT Parameters Table | |||||||||||
Principal CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
160 | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Ability Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
Bucket Quantity /L | 2.6 | four.1 | six.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
bodyweight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.four | 43.25 | 60.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Operating Pace v/(m/s) | 0.93 | .93 | 1.04 | 1.04 | 1.17 | one.17 | one.32 | one.31 | 1.47 | 1.47 | one.47 |
Lifting peak max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
1. Filling aspect ψ=1 2. Bucket volume=Volume of full drinking water 3. Maximum lifting peak = axis length of bucket elevator |
THG Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Major CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
one hundred sixty | two hundred | 250 | 315 | four hundred | 500 | 630 | 800 | 1000 | 1250 | 1600 | |
Capacity Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
Bucket Quantity /L | one.9 | 2.9 | four.6 | 7.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
weight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.four | 43.25 | sixty.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Managing Speed v/(m/s) | 0.93 | .93 | one.04 | one.04 | one.17 | one.17 | 1.32 | 1.31 | 1.47 | 1.47 | one.47 |
Lifting height max/m | 75 | seventy five | seventy five | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
1. Filling aspect ψ=1 2. Bucket volume=Volume of complete water three. Optimum lifting peak = axis length of bucket elevator |
Choice Conditions
♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Of course or No) |
♦Handling capacity (Ps. It signifies the overall | ♦Working atmosphere is indoor or outdoor:________ |
material capacity feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Sure or No) |
♦Bulk Density: _____t/m3 | ♦Working surroundings temperature: _______ ºC |
♦Lifting height of the elevator (distance among | ♦Upstream tools (Ps. It implies what kind of |
inlet and outlet):__________m | equipment is utilized to feed the material): _____ |
♦Max. granule dimensions of the feeding material: ____mm | ♦Downstream products (Ps. It means what type of |
♦Percentage of Max. granule in material:_________% | gear is utilised to discharge the materials): _____ |
♦Material temperature: _____ºC | ♦Working energy source: _____V ______HZ |
♦water content:____% |
We largely provide the adhering to productss :
Vibrating Screen | Rotary vibrating display screen |
Ultrasonic vibrating display screen | |
Gyratory display | |
Trommel display | |
CZPT vibrating display | |
Round vibrating display screen | |
Dewatering screen | |
Vibrating feeder | |
Belt CZPT | Belt conveyor |
Sidewall belt conveyor | |
Portable belt conveyor | |
Shuttle conveyor | |
Tripper | |
Bucket CZPT | Efficient bucket elevator |
Belt bucket elevator | |
Ring chain bucket elevator | |
Plate chain bucket elevator | |
Cement bucket elevator | |
Silo bucket elevator | |
Screw CZPT | U-variety screw conveyor |
Cement screw conveyor | |
Pipe screw conveyor | |
Scraper CZPT | Horizontal scraper chain conveyor |
Incline scraper chain conveyor | |
Grain scraper chain conveyor |