Equipment Bins For Rotary Cutter’s, Shredders, and Choppers
Merchandise description
RC 30 Sequence Gearbox, 40hp Rated, one-three/eight” SB input, one-1/2″ X 12 Spline Output. one:one.47 Ratio Change your broken rotary cutter gearbox with this substitution device. Why rebuild when you can substitute at this sort of a minimal cost? These gearboxes have been employed by Worksaver, HawkLine, Global, WAC, Big Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and several a lot more. Observe: True Gearbox could have a rounded housing or sq. as shown, dependent on current availability, all internal areas are interchangeable and requirements for equally packing containers are similar! This gearbox characteristics a 1:one.forty seven Pace Up gear ratio for use on 5′ and larger diameter rotary cutters. Industry regular one-3/eight” easy diameter enter shaft with one/two” shear bolt gap and retaining ring groove and one.fifty seven” diameter twelve tapered spline output shaft permit fitment to most light, standard and medium duty rotary cutters. 
Every gearbox attributes substantial velocity ball bearing units and heat handled gears and shafts to guarantee extended life. Four bolt mounting matches industry standards. Each and every gearbox contains blade carrier mounting nut and cotter pin. Gearboxes are shipped dry and call for sixteen ounces of eighty-90W gearlube or equivalent. Disclaimer: Any and all First Tools Manufacturer’s (OEM) tradenames, logos, drawings, colours, descriptive data and element quantities are utilised for parts identification needs only, and DN Gear, LLC (DN) is in no way implying that any distinct components are OEM parts. Further, any use of the OEM’s tradenames, logos, drawings or compo
nent numbers by DN is made only to aid DN’s clients, in obtaining the proper DN portion or part which will replace the OEM’s component.
rotary cutter gearbox
