The EP Greenhouse geared motor is a compact and lightweight reduction gear driver with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear reducer is used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear driver is usually rainproof and windproof. The gear reducer includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission means that the drive shaft is certainly locked when the reduction gearbox is not running. The completely sealed reduction reducer comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all situations, even at high temperatures. Thanks to the use of an growth chamber, the gear driver could be installed in any placement. There are no limitations, because there is no dependence on a bleed plug. The sealed reduction gear motor keeps the apparatus essential oil of the geared motor in optimum condition because of its entire operating life time. The geared motor is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an included chamber and can be enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and easy to adjust. The limit switch system’s maximum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).